Marking and Labeling System Materials		MH10170
Guide Information
FLEXCON CO INC
FLEXCON CO INC
Compucal II - TAMPERmark MM-200-S MT/C-329 L-156 (%)
Pressure-sensitive unprinted label stocks
Description: unprinted silver polyester facestock with adhesive which is protected by a release liner (Film has a release treatment in a "check" or "void" pattern)

Application Surface	Max Temp (°C)	Min Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Acrylic powder paint	150	-40	Yes	Yes	O
Aluminum	150	-40	Yes	Yes	O
Epoxy powder paint	150	-40	Yes	Yes	O
Galvanized steel	150	-40	Yes	Yes	O
Polyester paint	150	-40	Yes	Yes	O
Polyester powder paint	150	-40	Yes	Yes	O
Polyurethane powder paint	150	-40	Yes	Yes	O
Stainless steel	150	-40	Yes	Yes	O
Alkyd paint	125	-40	Yes	Yes	O
Phenolic - Phenol Formaldehyde	100	-40	Yes	Yes	O
Polyphenylene oxide/ether	100	-40	Yes	Yes	O
Melamine	80	-40	Yes	Yes	O
Nylon - Polyamide	80	-40	Yes	Yes	O
Polycarbonate	80	-40	Yes	Yes	O
Polystyrene	80	-40	Yes	Yes	O
Polyvinyl chloride	80	-40	Yes	Yes	O
Unsaturated polyester - thermoset	80	-40	Yes	Yes	O
Acrylonitrile butadiene styrene	60	-40	Yes	Yes	O
Polypropylene	60	-	Yes	No	O

Canadian Application Surface	Max Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Metals	150	Yes	Yes	-
Powder coated metal B	150	Yes	Yes	-
Powder coated metal C	150	Yes	Yes	-
Powder coated metal D	150	Yes	Yes	-
Plastic Group II	100	Yes	Yes	-
Plastic Group III	80	Yes	Yes	-
Plastic Group V	80	Yes	Yes	-
Plastic Group VI	80	Yes	Yes	-
Plastic Group VII	80	Yes	Yes	-
Plastic Group VIII	80	Yes	Yes	-

(%) -	Where "%" is replaced by CHK, Check, Checkerboard, or Void.
NOTE -	(1) The following alternate nomenclature may be used: "BBS" or "BB Stainless", "C" or "Clear", "CM" or "Clear Matte", "FC" or "Frosty Clear", "G" or "Gold", "RBBS" or "RBB Stainless", "S" or "Silver", "SM" or "Silver Matte", "THRMFLM" or "THERMLfilm", "TMP" or "TMPRK" or "TAMPERmark", "W" or "White". (2) Additional characters may be added to the end of the label designation indicating the type of release liner used unless a specific release liner is indicated. (3) Model designations may or may not include hyphens, apostrophes, single quotes, or dashes as part of the nomenclature. (4) In specific product designations the symbol---X is replaced by a word or characters which represent a specific color. And the symbol--XX is replaced by a word or numerical characters which identify a holographic pattern or image.
O -	Occasional exposure to Lubricating Oil.

Report Date:	2021-04-13	© 2026 UL Solutions
Last Revised:	2021-04-13