| Conditions of Use: | |
| 1. | Environmental Suitability: Wet, Damp or Dry Location. |
| 2. | This product requires an electrical enclosure. |
| 3. | Circuit Type: Class 2 |
| 4. | This device is of the constant voltage type which requires that the number of modules and controllers used does not exceed the maximum output current. |
| 5. | Input Ratings - Voltage: 100-277Vac; Frequency: 50/60Hz; Max Amps: 2.1A; Max Watts: 208W |
| 6. | Output Ratings - Voltage: 12Vdc; Amps: 5A; Max Watts: 60W |
| 7. | Maximum number of separate outputs(channels):3. |
| 8. | Maximum case temperature is 93.4°C. |
| 9. | Maximum ambient temperature permitted without additional testing is 50°C. |
| 10. | The LED Power Supply is suitable for use in dry, damp and wet locations. Additional considerations may be necessary as this LED Power Supply is integrated into wet rated end devices (i.e. input and output wiring, accessibility of the output based on maximum voltage restrictions for wet rated Class 2 circuits, acceptability of markings, etc.). |
| 11. | In the end product, power supply shall be located not less than 1 inch (25.4mm) apart when arranged end-to-end, and not less than 4 inches (102mm) apart when arranged otherwise |
| 12. | The LED drivers are of the constant voltage type that require the proper number of LED module and controller loads that do not exceed the maximum output current rating. |
| 13. | The products are intended for built-in factory assembled sign use, where the suitability of the enclosure, mounting, and input/output connections shall be considered in the end product |