Marking and Labeling Systems		MH15654
Guide Information
MELROSE NAMEPLATE & LABEL CO
26575 Corporate Ave, Hayward CA 94545
MLP-009a2
Pressure-sensitive printed labels
Description: subsurface printed clear polycarbonate facestock with adhesive which Is protected by a release liner

Application Surface	Max Temp (°C)	Min Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Acrylic powder paint	80	-40	Yes	No	-
Alkyd paint	80	-40	Yes	Yes	-
Aluminum	80	-40	Yes	Yes	-
Epoxy	80	-40	Yes	Yes	-
Epoxy powder paint	80	-40	Yes	Yes	-
Epoxy powder paint (textured)	80	-40	Yes	No	-
Galvanized steel	80	-40	Yes	Yes	-
Nylon - Polyamide	80	-40	Yes	Yes	-
Polyester powder paint	80	-40	Yes	No	-
Polyester powder paint (textured)	80	-40	Yes	No	-
Polyphenylene oxide/ether	80	-40	Yes	Yes	-
Polypropylene	80	-40	Yes	No	-
Porcelain	80	-40	Yes	No	-
Stainless steel	80	-40	Yes	No	-
Urethane powder paint	80	-40	Yes	No	-
Acrylonitrile butadiene styrene	60	-40	Yes	Yes	-
High density polyethylene	60	-40	Yes	No	-
Polycarbonate	60	-40	Yes	No	-
Low density polyethylene	40	-40	Yes	No	-
Polystyrene	40	-40	Yes	No	-

Note -

(1) The following alternate nomenclature may be used: "BBS" or "BB Stainless", "C" or "Clear", "CM" or "Clear Matte", "G" or "Gold", "RBBS" or "RBB Stainless", "S" or "Silver", "SM" or "Silver Matte", "THRMFLM" or "THERMLfilm", "TMP" or "TMPRK" or "TAMPERmark", "W" or "White". (2) Additional characters may be added to the end of the label designation indicating the type of release liner used unless a specific release lener is indicated. (3) Model designations may or may not include hyphens, apostrophes, single quotes, or dashes as part of the nomenclature.

Report Date:	2022-03-17	© 2025 UL Solutions
Last Revised:	2022-03-22