iq.ul.com
Marking and Labeling SystemsMH15654
Guide Information
MELROSE NAMEPLATE & LABEL CO
26575 Corporate Ave, Hayward CA 94545
MLP-010a
Pressure-sensitive printed labels

Application Surface
Max Temp
(°C)
Min Temp
(°C)
Indoor
Use
Outdoor
Use
Additional
Conditions
Acrylic paint125-40YesYes-
Alkyd paint125-40YesYes-
Aluminum125-40YesYes-
Brass125-40YesYes-
Epoxy paint125-40YesYes-
Epoxy powder paint125-40YesNo-
Epoxy/Urethane powder paint125-40YesYes-
Galvannealed steel125-40YesYes-
Glass125-40YesYes-
Polyester paint125-40YesYes-
Polyester powder paint125-40YesYes-
Porcelain125-40YesYes-
Stainless steel125-40YesYes-
Melamine100-40YesYes-
Nylon - Polyamide100-40YesYes-
Phenolic - Phenol Formaldehyde100-40YesYes-
Acrylonitrile butadiene styrene80-40YesYes-
Polybutylene terephthalate80-40YesYes-
Polycarbonate80-40YesYes-
Polyethylene80-40YesYes-
Polyphenylene oxide/ether80-40YesYes-
Polypropylene80-YesNo-
Polystyrene80-40YesYes-
Polyvinyl chloride80-40YesYes-
Unsaturated polyester - thermoset80-40YesYes-
Note - (1) The following alternate nomenclature may be used: "BBS" or "BB Stainless", "C" or "Clear", "CM" or "Clear Matte", "G" or "Gold", "RBBS" or "RBB Stainless", "S" or "Silver", "SM" or "Silver Matte", "THRMFLM" or "THERMLfilm", "TMP" or "TMPRK" or "TAMPERmark", "W" or "White". (2) Additional characters may be added to the end of the label designation indicating the type of release liner used unless a specific release lener is indicated. (3) Model designations may or may not include hyphens, apostrophes, single quotes, or dashes as part of the nomenclature.
Report Date:2022-11-08© 2024 UL Solutions
Last Revised:2022-11-17