Plastics for Additive ManufacturingE527425
Guide InformationView Certificate of Compliance
Prusa Polymers a.s.
Partyzanska 7a/188, Prague 7 170 00 CZ
Prusament PETG V0
Process Category: Material Extrusion
Polyethylene Terephthalate-glycol (PET-g), furnished as filaments

Min. Thk


NC, BK0.75V-0--757575
Comparative Tracking Index (CTI):-Inclined Plane Tracking (IPT) kV:-
Dielectric Strength (kV/mm):-Volume Resistivity (10x ohm-cm):-
High-Voltage Arc Tracking Rate (HVTR):-Surface Resistivity (10x ohms/square):-
Dimensional Change (%):-High Volt, Low Current Arc Resis (D495):-
Processing Parameters:
Build Plane:Horizontal & VerticalRaster Angle (Degrees):45/-45
Layer Thickness (mm):0.2Print Speed (mm/sec):55-200
Air Gap (mm):0Nozzle Diameter (mm):0.4
Post Processing Method:None
For use with printer:Original Prusa i3 MK3S+, Original Prusa MK4, Original Prusa XL Printer Preset: Balanced or default
Limited properties and ratings assigned to samples produced by the Additive Manufacturing technique representing a specific set of printing parameters and build strategy. Other print parameters and build strategies may result in significantly different results.
IEC/ISO small-scale test data does not pertain to building materials, furnishings and related contents. IEC/ISO small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:2023-08-01© 2024 UL Solutions
Last Revised:2024-02-16
IEC and ISO Test Methods
Test NameTest MethodUnitsThk (mm)Value
FlammabilityIEC 60695-11-10Class (color)0.75V-0 (NC, BK)
3.0V-0 (NC, BK)
Glow-Wire Flammability (GWFI)IEC 60695-2-12°C--
Glow-Wire Ignition (GWIT)IEC 60695-2-13°C--
IEC Comparative Tracking IndexIEC 60112Volts (Max)--
IEC AC Dielectric Strength (AC DS)IEC 60243-1kV/mm--
IEC DC Dielectric Strength (DC DS) IEC 60243-2kV/mm00.2
IEC Volume Resistivity (VR)IEC 62631-3-110x ohm-m--
IEC Surface Resistivity (SR)IEC 62631-3-210x ohms--
IEC Inclined Plane Tracking (IPT)IEC 60587kV4555
IEC Ball PressureIEC 60695-10-2°C--
ISO Heat Deflection (1.80 MPa)ISO 75-2°C--
ISO Tensile StrengthISO 527-2MPa--
ISO Flexural StrengthISO 178MPa--
ISO Tensile ImpactISO 8256kJ/m2--
ISO Izod ImpactISO 180kJ/m2--
ISO Charpy ImpactISO 179-1kJ/m2--