UL Certification: E45329 - Component

iq.ul.com

	CLICK TO CONTINUEView additional material information including performance and processing data	The information presented on the UL Prospector datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Component - Plastics		E45329
Guide Information	View Certificate of Compliance
SABIC INNOVATIVE PLASTICS B V
EUROPE - RESIN, PLASTICSLAAN 1, BERGEN OP ZOOM 4612 PX NL
CXL7230 (f1), CXL7230B (f1) (T N4)
Polycarbonate/ Siloxane (PC/Si) "ELCRES", furnished as pellets

Comparative Tracking Index (CTI):	3	Inclined Plane Tracking (IPT) kV:	-
Dielectric Strength (kV/mm):	25	Volume Resistivity (10^x ohm-cm):	16
High-Voltage Arc Tracking Rate (HVTR):	3	Surface Resistivity (10^x ohms/square):	-
Dimensional Change (%):	0.15	High Volt, Low Current Arc Resis (D495):	7

(T N4) -	Trade name ELCRES represents CRX7230 and tradename ELCRIN represents CRX7230B
(f1) -	Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.
NOTE -	Material designation may be followed by a color nomenclature consisting of either an alpha/numeric or a numeric/alpha combination.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date:	2022-02-05	© 2024 UL Solutions
Last Revised:	2024-06-14

IEC and ISO Test Methods
Test Name	Test Method	Units	Thk (mm)	Value
Flammability	IEC 60695-11-10, IEC 60695-11-20	Class (color)	0.6	HB, HB75 (ALL)
			0.8	V-1 (ALL)
			1.0	V-0 (ALL)
			1.5	V-0 (ALL)
			2.0	V-0 (ALL)
			2.5	V-0,5VB (ALL)
			3.0	V-0,5VB (ALL)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	°C	0.8	960
			1.0	960
			1.5	960
			2.0	960
			3.0	960
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	°C	0.8	800
			1.0	825
			1.5	800
			2.0	800
			3.0	800
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	CTI225
		Material Group		IIIa
IEC AC Dielectric Strength (AC DS)	IEC 60243-1	kV/mm	-	-
IEC DC Dielectric Strength (DC DS)	IEC 60243-2	kV/mm	-	-
IEC Volume Resistivity (VR)	IEC 62631-3-1	10^x ohm-m	-	-
IEC Surface Resistivity (SR)	IEC 62631-3-2	10^x ohms	-	-
IEC Inclined Plane Tracking (IPT)	IEC 60587	kV	-	-
IEC Ball Pressure	IEC 60695-10-2	°C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	°C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m²	-	-
ISO Izod Impact	ISO 180	kJ/m²	-	-
ISO Charpy Impact	ISO 179-1	kJ/m²	-	-