Component - PlasticsE41938
Guide Information
CELANESE INTERNATIONAL CORP - Florence
8040 DIXIE HWY, FLORENCE KY 41042-2904
101(f2)(r9), 101F(f2)(r9), 101L(f2)(r9)
Polyamide 66 (PA66) "Zytel", furnished as pellets

Color		Min. Thk
(mm)		Flame
Class
HWI
HAI		RTI Elec
(°C)		RTI Imp
(°C)		RTI Str
(°C)
ALL0.71V-2401307585
1.5V-2301307585
3.0V-2201307585
6.0V-2201307585
Comparative Tracking Index (CTI):0Inclined Plane Tracking (IPT) kV:-
Dielectric Strength (kV/mm):13Volume Resistivity (10x ohm-cm):14
High-Voltage Arc Tracking Rate (HVTR):0Surface Resistivity (10x ohms/square):-
Dimensional Change (%):-High Volt, Low Current Arc Resis (D495):6
(f2) - Subjected to one or more of the following tests: Ultraviolet Light, Water Exposure or Immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL.
(r9) - Virgin and regrind up to 50% by weight inclusive, have the same basic material characteristics for ALL colors down to 0.71mm. For thickness 0.40mm to 0.70mm the same basic material characteristics exist with the exception of generic RTIs for all properties and Regrind exceeding 25% is limited to V-2 Flammability for WT, RD, BK.
NOTE - (1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "CRA" for Crastin or "RYN" for Rynite.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.
Report Date:1996-07-29© 2026 UL Solutions
Last Revised:2025-06-12