Component - Plastics		E44716
Guide Information
Technyl (France) SAS
Avenue Ramboz, Saint Fons 69190 FR
A 50H1 (r3)(f2)
Polyamide 66 (PA66), unfilled "Technyl", furnished as pellets

Color	Min. Thk (mm)	Flame Class	HWI	HAI	RTI Elec (°C)	RTI Imp (°C)	RTI Str (°C)
ALL	0.4	V-0	4	3	130	105	120
	0.75	V-0	2	3	130	105	120
	1.5	V-0	2	3	130	105	120
	3.0	V-0	2	3	130	105	120

Comparative Tracking Index (CTI):	0	Inclined Plane Tracking (IPT) kV:	-
Dielectric Strength (kV/mm):	1.5	Volume Resistivity (10x ohm-cm):	0
High-Voltage Arc Tracking Rate (HVTR):	-	Surface Resistivity (10x ohms/square):	-
Dimensional Change (%):	-	High Volt, Low Current Arc Resis (D495):	-

(f2) -	Subjected to one or more of the following tests: Ultraviolet Light, Water Exposure or Immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL.
(r3) -	Virgin and regrind up to 50% by weight inclusive have the same basic material characteristics
NOTE -	Materials designated "Technyl" may be prefixed by the letters "TY". Optional color name (in letters) followed by 1 to 10 alphanumeric code. Materials with codes ending with letter "A", "B", "D", "J", "M" or "W" alone are not UL Recognized.
ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

		© 2026 UL Solutions
Last Revised:	2026-10-05