Certificate of Compliance

CERTIFICATE OF COMPLIANCE

Certificate Number:

UL102463640-E121855

Report Reference:

E121855-2015-10-20

Issue Date:

December 21, 2024

Issued to:

FORMEX, DIV OF ILLINOIS TOOL WORKS INC

425 N Gary Ave, Carol Stream IL 60188

This is to certify that representative samples of:

Formex CND-(b)(e)(k)(L)(f2)/Polycarbonate (PC)

covered under the category:

Plastics (QMFZ2)

have been investigated by UL in accordance with the following standard(s):

ISO 9773, Plastics-Determination of Burning Behavior of Thin Flexible Vertical Specimens in Contact with a Small-Flame Ignition Source

(L) -	Meets the requirements for Reinforced Insulation and Supplementary Insulation requirements in IEC60950-1 , IEC62368-1, IEC61558-1, IEC60065 and IEC61347-1 at thicknesses between 0.16 mm and 0.25 mm inclusive
(b) -	May have additional suffix letter(s) indicating color.
(e) -	Meets the requirements for IEC 60950-1, IEC 61558-1 Mandrel Test at 0.16 mm, 0.19 mm and 0.25 mm thickness at 7KvAC
(f2) -	Subjected to one or more of the following tests: Ultraviolet Light, Water Exposure or Immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL.
(k) -	Complies with the IEC 60695-11-5, 12 mm Flame Test (60 Sec flame duration).
NOTE -	HVTR, CTI and D495 are not dependent on thickness

For additional information please see the UL Product iQ™ and the Product Certification

Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service.

Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL Solutions.

Look for the UL Certification Mark on the Product


Deborah Jennings-Conner, VP Regulatory Services
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL Solutions (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations
© 2024 UL Solutions